Royal CNC Collet Chucks provide a simple, low-cost method for utilizing collets on all CNC lathes and turning centers.

For many years, CNC collet chucks that used spring-style collets (5C, 3J, S-26, etc.) were the industry standard. However, that has now changed with the introduction of the Royal Quick-Grip CNC Collet Chuck.

Royal CNC bar pullers can be used to easily automate any CNC lathe or turning center. Bar pullers improve productivity by enabling CNC lathes to run unattended, freeing up operators to handle other tasks. Royal CNC bar pullers are inexpensive, require minimal setup, and can be easily fit to any CNC lathe.

Royal Products offers a range of collets for a variety of turning and milling applications.

With outstanding quality and very competitive pricing, Royal expanding, step, and ER collets offer unbeatable value.

The Royal Easychange R8 Quick-Change Tool System provides a fast method for changing tools on any Bridgerport-style milling machine. Once the R8 body is installed in the machine spindle, tools can be changed in seconds. Total system runout is less than 0.0005” TIR.

Easychange operation is simple — with one hand simply depress the brass locking button and rotate the collar to the locked-open position. When a new tool is inserted, it depresses a spring-loaded pin, snapping the collar back into the locked-closed position.

The Royal sensitive drill feed provides fingertip control when drilling very small holes on a drill press or milling machine. This tool bypasses the machine’s coarse quill feed, giving the operator better feel and control of the feed rate. Breakage of small diameter drills is greatly reduced and the tendency for drill “walking” is minimized.

The Royal sensitive drill feed has a 1/2″ straight shank that can be gripped in a collet or toolholder, and a male J0 taper for mounting a drill chuck. A ball bearing isolates the knurled ring from the rotating spindle.

For more than 100 years, Albrecht has been the leading producer of the world’s most consistently accurate drill chucks.

Founded in 1908 with a patent on the industry’s very first keyless drill chuck, Albrecht has continued a tradition of unmatched quality and innovation.

Royal’s line of CNC Expanding Mandrels offers an off-the-shelf ID workholding system to fit a wide range of applications.

Royal’s unique modular design covers a standard gripping range from 0.5″ to 3.25″, with specials available up to 25″. Sleeves offer parallel expansion for maximum rigidity, and accuracy is guaranteed to +/- 0.0005″ TIR. Mulitple mount styles and custom-machined drawtbue connectors ensure simple, turnkey mounting on both main and subspindle applications.

Royal live centers are widely regarded by top metalworking professionals as the best live centers available anywhere in the world. Each Royal live center is a finely crafted tool, incorporating the highest quality steels, bearings, and seals. Manufactured to exacting tolerances, most Royal live centers are guaranteed accurate to +/- 0.00005″ TIR or better.

Royal Products offers a range of collet fixtures for use on rotary tables, indexers, machining center tables, and tombstones. Available to suit a wide variety of collets, actuation can be accomplished manually, hydraulically, or pneumatically.

The Royal Key-Operated Quick-Grip Collet Chuck brings full Quick-Grip functionality to your manual engine lathes and grinders, including ten-second collet changes and a full 0.062″ clamping range.

Completely self-contained, this collet chuck does not require a hydraulic actuator for operation, and the large 2-5/8″ capacity offers a significant advantage over old-style 5C collet closers.

Royal dead centers are typically used in both grinding and high-precision turning applications. All Royal dead centers are made from high-grade alloy steels and are hardened for strength and durability. Precision ground tapers and point angles ensure outstanding workpiece accuracies and surface finishes.

The Royal Chuck Stop provides a simple, consistent method for locating short parts in a three-jaw lathe chuck. The chuck stop enables short parts to project beyond the chuck jaws, providing clearance for facing operations.

The Royal Chuck Stop is very accurate — front and rear locating surfaces are parallel within +/- 0.0004″. Because the Royal Chuck Stop eliminates the need to bore soft jaws, machine setup time is greatly reduced.

Royal stocks hundreds of deburring tools for virtually every application, including: ID’s, OD’s, straight edges, keyways, etc.

In addition to our broad range of deburring tools, we also stock an extensive array of deburring blades. All Royal deburring blades are made from the highest quality tool steels and are precision ground, providing exceptional burr removal and long edge life.

Low cost, highly efficient mist and smoke collectors designed specifically for the metalworking industry.

For over 30 years, the Royal Filtermist has been effectively collecting oil mist and smoke generated by all types of metalworking machinery. There are currently over 150,000 Filtermist units operating in over 50 countries worldwide, making Filtermist the world’s leading mist collector.

The patented Royal Rota-Rack is a lean, cost-effective device that safely collects finished parts as they come off of a CNC lathe, providing a competitive advantage to manfuacturers by enabling their machine tools to run unattended for extended periods of time.

The Rota-Rack is reliable, doesn’t take sick days, and will keep your machines running long after your last employee has left for the night or weekend. And with very competitive pricing, the Royal Rota-Rack typically pays for itself within the first few months of use.

Royal machine mounts simplify machine installation, reduce noise, and isolate vibration. They are great for all types of machinery, including lathes, mills, grinders, presses, and injection molding machines.

Royal machine mounts meet OSHA requirements by preventing machines from “walking” without the need for bolting or cementing.

The Royal PneuVac Pump is a simple device that uses a compressed air-powered venturi to create a vacuum. All you have to do to operate the PneuVac pump is: attach the pump and hose to a standard 55-gallon drum, hook up your compressed air supply to the pump, insert the free end of the suction hose into the sump or storage tank, and open the air valve. The coolant and sludge is drawn through the hose and deposited into the drum – quick, clean, and hassle-free.

Royal PneuVac Air Guns make shop cleanup tasks a breeze. The unique design of this tool enables it to act as both a blow gun and a vacuum. Airflow direction is changed simply by reversing the direction of the internal venturi.

The unique design of the PneuVac gun significantly increases input airflow. For example, an input air supply of 10 cfm produces an output of almost 100 cfm.